Technical data
| Instrument | Cello |
| Material | hard plastic with stainless steel insert |
| Item number | ZP-6168 |
Features
- Set of endpin rest and endpin rubber
In practice
- Two reasons for the rubber: in the case it protects the case bottom from the sharp tip, when playing it protects the floor. Many professional musicians leave it on the tip in the case
- An endpin rubber protects the floor and the tip and is a wearing part. Hardened or split rubber slips.
- On smooth floors friction alone is often not enough. Then an endpin rest with a socket or an anchor helps.
Grip and floor protection
Our ZP-2016 series endpin rests are 10 cm in diameter and 1.7 cm high; a magnet in the centre centres the endpin over an ebony inlay. Their underside of cellular rubber grips on wood, PVC, laminate and glass with a coefficient of friction above 0.9: only a sideways force of more than nine tenths of the load the endpin places vertically will make the rest slide.
The ZP-6168 has a hard plastic housing with a stainless steel insert and a washable underside of micro cellular rubber; it measures around 9.5 cm in diameter and takes endpins up to 15 mm. The 3S-503 endpin rubber is an NR/SBR rubber compound with a hardness of 60 ± 5 Shore A (the hardness scale for rubber); it weighs 3 g and fits endpins 6 to 7 mm in diameter.
Our experience
The Götz ZP-6168 endpin rest has proved itself over more than 70 years, and it always comes with two 3S-503 endpin rubbers.
Frequently asked questions
Will the endpin rubber fit my endpin?
Yes, if the endpin is 6 to 7 mm in diameter, the standard size of most cello endpins.
These texts hold decades of experience and a great deal of heart. They are protected by copyright, C.A. Götz jr. GmbH. Please ask us before any use. Thank you for your appreciation.
