Panther Hightech 6 Bows Case for Violin, Viola & Cello, BAM-PANT7001XL

BAM-PANT7001XLG

The Hightech shell is BAM's three layer structure, thermoformed in France.

  • Shells in BAM Hightech construction: three layer structure of high performance materials (ABS, Airex foam, further ABS)
  • 1 comfortable, non-slip neoprene backpack strap with safety screw hook
Variant

Regular price€561,00
/
Tax included.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.


Panther Hightech 6 Bows Case for Violin, Viola & Cello, BAM-PANT7001XL

Technical data

LineHightech
InstrumentBow
MaterialHightech ABS shell
Weight1.2 kg
Interior dimensions77x12.5x4cm
Exterior dimensions80x15.5x7cm
BAM referencePANT7001XL
Item numberBAM-PANT7001XLG

Interior features

  • Six separate slots for violin, viola or cello bows

Exterior features

  • Very comfortable two material side handle
  • 2 integrated locks
  • Airtight seal

Protection and climate

BAM's Hightech shell is built in three layers: ABS on the outside, a foam core of injected polyurethane or, depending on the model, Airex in the middle, and a third layer of PETG or ABS on the inside. BAM thermoforms these shells in France, with part of the production based in Thailand.

The interior is foamed in a single piece and set firmly into the shell; as the instrument is fitted, the padding yields to its shape.

The three-layer shell works as a buffer against swings in temperature and humidity. Open the case after moving into a different climate and the instrument meets the new conditions gradually rather than all at once.

A shady spot suits the shell best: in full sun, for example in a parked car, it can warp or blister.

With bows, length matters, as fine bows are usually a little longer than simple ones.

The bow responds to humidity too: on our violin bows, damper air makes the hair heavier by up to around 1 g.

Our experience

Our experience from shipping is clear: an instrument travels far more safely in a BAM case than in a cardboard box. Every case we deliver passes through our own quality check first.

We make small scratches on the shell almost invisible with ordinary car polish, and we leave alcohol and white spirit well alone.

We get a loose rotating bow holder to hold again by packing the screw holes with small pieces of a wooden toothpick, with no glue at all, whose residue would harm the velour.

When another model suits you better

If every gram counts, the standard Hightech version of the same form, without the rubberised layer, is the natural choice.

Frequently asked questions

Why does my case weigh a little more than stated?

The stated weight is the net weight without straps. Because the density of the plastic varies slightly, an individual case can weigh around 100 g more.

Can BAM cases be stacked?

No, BAM cases should not be stacked; give each case a place of its own.

Can a cracked shell be repaired?

BAM replaces the complete upper or lower shell in France, as a crack cannot be repaired locally. Smaller damage such as pushed-in feet can be fixed with patches.

Will viola and cello bows fit in the 7001XL?

Yes, the 7001XL takes six violin, viola or cello bows.

Does Panther protect differently from the Hightech case?

The interior is identical. Panther adds a rubberised, scratch- and slip-resistant surface and is minimally heavier as a result.


Recently viewed